Makita DTL061Z Angle Impact Driver 18v Body Only

£214.74 £178.95

We are happy to help with enquiries, stock availability or any technical help you require, however for security reasons we cannot take orders over the phone. So if you need to chat give us a call on 03301231763 or email us at

Makita DTL061Z 18V LXT Angle Impact Driver (Body Only)

DTL061Z supplied

Technical specifications

- Voltage  14.4 v
- Drive hex  1/4 "
- Machine Screw Size  M4-M8 mm
- Standard Bolt  M4-M8
- High Tensile Bolt  M4-M8
- Coarse thread (length)  22 - 75 mm
- Impacts  0 - 3000 ipm
- Max Torque  60 Nm
- No Load Speed  0 - 2000 rpm
- Battery Type Lithium-ion   
- Charging Time  22 min
- Battery Quantity (3.0 Ah) 2   
- Vibration: Fastening Bolt 9 m/sec²  
- Vibration K factor 1.5 m/sec²  
- Noise sound pressure 91 dB(A)  
- Noise sound power 102 dB(A)  
- Noise K factor 3 dB(A)  
- Net weight 1.7 kg  

User benefits

- 22 minute charge time with the air cooled Makstar Optimum Charging System.
- 4 pole motor.
- Keyless single sleeve hex chuck.
- Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
- Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
- Large trigger.

Standard equipment


Customer Questions
No Questions
Did you find what you were looking for?
More Information
Supplier Part NumberDTL061Z
Battery ConfigurationBody Only
Carry CaseNo
Corded / CordlessCordless

Orders and Delivery

We offer FREE* delivery on all orders totalling over £100.00 including VAT.

For all orders under £100 the standard delivery charge will be £7.19 inc VAT.

*Free delivery is available to UK mainland addresses only.

Delivery charge - Please note, orders under £100 inc VAT will be subject to a delivery charge of £7.19 inc VAT (subject to clauses 11.4 and 11.5 of our terms of sale). In most cases, orders over £100 inc VAT may qualify for free delivery subject to product availability, delivery type (i.e. by pallet) and delivery location, however you will be notified of any delivery or carriage charges during the check-out process in accordance with clause 11.3 of our terms of sale or, in some cases, following check-out but before delivery in accordance with clauses 11.4 and 11.5 of our terms of sale.

All orders to addresses in areas such as Northern Ireland, Scottish Highlands, parts of Cornwall and the Channel Islands can incur an additional delivery charge.
If you would like your order delivering to an address which is different to the card holder’s address, please place the order using the card holder’s address and then send us an email with the required delivery address, we will then amend your details and email you to confirm.”

Returns and Refunds

In the unlikely event that you need to return an item, please contact our team on within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.

All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of  friendly team, who will help with the process.

Powertools2u Express
c/o SIG
Unit 10
Kingsmark Freeway
BD12 7HW

Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.

Write Your Own Review
You're reviewing:Makita DTL061Z Angle Impact Driver 18v Body Only
Your Rating

All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online.  Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures. 

We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool.  Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.









Popular products

Need Insulation? We can help

Check out our new website!

For all your roofing needs